MP2RX - Jack 6.35mm Plug Mono Right Angle

The MP2RX is a slim, mono 1/4" right-angle plug engineered for reliable, long-term performance in professional audio applications. Built on a sturdy die-cast zinc alloy housing with a chrome-plated finish and nickel-plated brass contacts, the MP2RX combines a compact right-angle profile with a chuck-style clamp sleeve for secure cable retention. Its polished housing design makes cable termination and field assembly straightforward, while its low-profile form factor is ideal for tight cable runs and space-constrained installations. Rated for use up to 50V DC and tested for more than 1,000 mating cycles, the MP2RX is built to withstand repeated use in demanding environments.

Key Features

• Slim Right-Angle Design: A low-profile 1/4" mono right-angle plug that reduces strain on cables and fits neatly into tight spaces.
• Chrome-Plated Housing: A precision, fine-finished chrome exterior delivers a durable, professional appearance.
• Nickel-Plated Contacts: Ensures stable signal transfer and long-term corrosion resistance.
• Die-Cast Construction: A sturdy zinc alloy housing provides excellent durability under repeated use.
• Chuck-Style Clamp Sleeve: Delivers secure, reliable cable retention and strain relief.
• Easy-Grip Housing: A polished, ergonomic design allows for smooth handling during installation and removal.
• Broad Cable Compatibility: Accommodates cable outer diameters from 4-7mm.

Material and Environmental Specifications

• Housing Material: Constructed from zinc alloy for structural strength and durability.
• Contact Material: Brass contacts with a nickel surface finish for consistent conductivity.
• Housing Plating: Chrome-plated exterior for a refined, corrosion-resistant finish.
• Operating Temperature Range: Performs reliably between -20°C and +65°C.
• Certified Standards: Solderability tested to IEC 68-2-20; certified to IEC 60603-11 / EIA RS-453.

Assembly Instructions

• Prepare the Cable: Thread the cable through the boot, housing, and insulation tube before stripping.
• Strip to Spec: Strip the cable to the dimensions specified in the datasheet, exposing the shielding layer and signal wire.
• Solder and Secure: Solder the conductor to the insert and secure the cable using the built-in clipboard-style cable clamp.
• Insulate and Cap: Slide the insulation tube over the cable and snap the top cover onto the assembled insert.
• Final Assembly: Tighten the housing clockwise onto the insert component, then tighten the boot clockwise onto the housing to complete assembly.